|
|
 |
|
 |
|
|
 Hardware for Access Control Systems
Jantek carries a wide range of hardware used for and with access
control systems. These parts include electric strikes, electromagnetic
locks, keypads and request to exit buttons. The list below details the
most commonly used parts; if you do not see the product you need, contact
us to find out whether we have it or if we may be able to order
it for you.
|
|
|
|
|
Smart Reader SR-100:
Standalone Access Control System
|
|
|
The SR-100 is a state-of-the-art standalone access control card
reader system with 100 card capacity (upgradeable to 1000 or 3500
card users).
A true self-contained controller/reader, no PC or hand-held
programmer is needed to use the SR-100. In addition, it is very easy
to program; access cards can be entered/deleted singly or by groups.
The door unlock time is programmable from 1 to 255 seconds, or the
door may be programmed to stay unlocked.
|
|
PR-30C Standalone Proximity Access
Control System
|
|
|
Features:
- Maximum read range: 12 - 18cm (5" - 7")
- Includes built-in proximity reader and programming keypad
- Data is protected even after power failure
- User capacity of 9,999 cards (or key tags)
- Built-in tamper switch triggers alarm relay when the case is
forced open or tampered.
Frequency: 125KHz
Dimensions: 13cm (L) x 8.6cm (W) x 2.5cm (H)
5.12" (L) x 3.39" (W) x 1" (H)
Relay: 2
relays (1 amp at 12V DC)
|
|
EL-391A
Electric Door Strike
|
|
| Quantity |
Price |
| 1~9 |
$39.00 each |
| 10+ |
$35.00 each |
|
|
Features:
- Corrosion resistant metal
- Metallic gray color
- Unlocks when energized
- Heavy duty construction
Operating voltage:
AC: 12V to 24V
DC: 9V to 14V
Dimensions:
13.2cm x 2.5cm x 3.3cm
(5.2" x 0.98" x 1.3")
1cm (0.4") Keeper Depth |
|
|
|
|
|
|
GK-300 Electric Strike
|
|
|
|
Features:
- Field-reversible for fail-secure or fail-safe
- Stainless steel keeper ensures strength and long life
- Strikes are powered by a solenoid, not a buzzer coil
- 2000 lbs jaw strength
- Tested to one million cycles
- Low current draw
- Symmetrical design
Operating voltage:
250mA at 12V DC
150mA @ 24V DC
Dimensions:
12.4cm (L) x 4.3 (W) x 3.3 mm (H)
(4.88" x 1.69" x1.3")
|
|
ML-100 Electromagnetic Lock
|
| Quantity |
Price |
| 1~9 |
$139.00 each |
| 10~49 |
$129.00 each |
| 50+ |
$99.00 each |
|
|
Features:
- Corrosion-resistant metal
- Locks when energized
- No residual magnetism
- Heavy-duty construction
- Over 5000N (1300Lbs) holding force
- Installation kit included
Operating voltage:
0.5 amp at 12V DC
0.25 amp at 24V DC
Magnet size:
26.5cm x 6.6cm x 4.1cm (10.4" x 2.6" x
1.6")
Armature plate size:
18.5cm x 6.1cm x 1.6cm
(7.3" x 2.4" x 0.6") |
|
JEB-002 Electric Door Bolt
|
|
|
|
Features:
- Fail-safe type
- Concealed mortise mounting
- Slim line styling suits most narrow
profile joinery
- Door & bolt position sensor
- Fully protected against transients
- Reverse-polarity protected
Operating voltage:
1 amp at 12V DC
Sensor delay time: 0, 3, 6, or 9 sec. (configurable)
Face plate dimensions:
20.2cm (L) x 3.8cm (W) x 4.1cm (H)
(7.95" x 1.5" x 1.57")
|
|
|
JSL-100 Shear Lock
|
|
|
Input voltage: 12 ~ 28V DC
Monitoring output
Shearing force: 2700 Lbs
Current draw:
Activation: 1.8 amp at 12V DC
Hold: 0.5 amp at 12V DC
Dimensions:
26.7cm x 3.5cm (3cm) x 4cm
(10.51" x 1.38" x 1.61") |
|
DK-9510D Standalone Digital Keypad (Indoor)
|
|
|
|
Features:
- Programmable 4-8 digit code length
- EPROM Non-volatile memory
- 5 Amp relay, dry contact
- Relay N/O or N/C field selectable
- Single user mode or multiple (up to 100) users
- Over 100 million code combinations
- Power supply included
Operating voltage:
15-80 mA @ 12V DC
Dimensions:
11.7cm x 7.4cm x 4.8cm
(4.6" x 2.9" x 1.9")
|
|
|
KR-300 Standalone Digital Keypad (Outdoor)
|
|
|
|
Features:
- 50 programmable user codes, 2 to 8 digits long
- Over 100 million codes possible
- Door position sensor input and alarm relay output for alarm
interface
- Self-contained system
- Easy to program and install
- Vandal resistant metal housing and keypad
- Weather resistant for indoor/outdoor use
- Zinc housing and
keypad, making for high durability and security
Operating voltage:
1.5A @ 12V DC
Dimensions:
12cm x 7.8cm x 3.2cm
(4.7" x 3.1" x 1.3")
|
|
PBT-060B Exit Button
|
|
|
Features:
- Stainless steel faceplate
- Normally open & normally closed contacts
Operating voltage:
5 amps at 250V AC maximum
6 amps at 24V DC maximum Dimensions:
116 mm x 70mm (4.6"x2.8") |
|
KS-2L Key Switch
|
|
|
Features:
- Latch ON/OFF
- Stainless steel faceplate
- Built-in tamper switch
- 2 LEDs (Green & Red)
Operating voltage:
3 amps at 130V AC maximum
Dimensions:
11.5 cm x 7 cm (4.5" x 2.8")
|
|
|
|
|
MK-2000 Sealed Ferrite Reader
|
|
|
Operating Environment:
-30.0C to 85.0C (-18°F to 176°F)
Dimensions:
134mm x 73mm x 47mm
(5.44" x 2.88" x 1.88")
|
|
|
 |
|
 |
|
|
|
|
