JPT-724 Standalone Bell Timer
The JPT-724 is a standalone programmable 7 day / 24 hour, multiple event
bell timer. It can perform up to 28 independent schedule events. Each of
these events may be programmed to occur at anytime, any day of the week.
The block feature can be used to repeat the same event Monday through
Friday. All schedules programmed are stored in the EEPROM memory and will
not be lost due to a power failure.
There are 3 types of events to choose from:
- RELAY ON to turn on the bell
- RELAY OFF to turn off the bell
- PULSE for bell duration from 1 to 15 seconds
(duration is programmable by the installer).
Plastic Case Size: 8 in x 7 in x 3.5 in
(20.32 cm x 2.76 cm x 8.89 cm)
Circuit Board Size: 5.25 in x 3 in x 1 in
(13.34 cm x 7.62 cm x 2.54 cm)
|Bell Kit including JPT-724, 10 in
(25.4 cm) bell, and bell power supply
|Additional 10 in (25.4 cm) bells
|Timer kit with external relay for existing bell or buzzer (maximum rating: 5A@240VAC)
|Paging system Timer Kit with annunciator (Up to 20 seconds of recorded sound, built-in microphone and volume control)